GUARANTEED MINIMUM ANALYSIS
Total Nitrogen (N) ................................. 34.00 %
Sulphur (S)................................................ 11.00 %
BENEFITS:
This blend was designed to supply nitrogen and sulphur
in forage grass stands, hay or pasture.
DIRECTIONS:
Rates may vary depending on soil types, crop history
and rain fall. The following rates are based on application
in the Fraser Valley. When a soil test is lacking, use the
following rates:
APPLICATION RATES:
Commercial Forage Stands:
For forage grass stands under intensive commercial
production, apply 34-0-0+11(S) at 200-350 lbs/acre when
growth starts in spring. Following each successive cut,
apply 34-0-0+11(S) at 200 lbs/acre until no further cuts
are desired or possible. Where irrigation is not available,
avoid applying fertilizer or use a nitrogen stabilization
product.
Hay:
Apply 34-0-0+11(S) in the spring when growth starts at
200-350 lbs/acre. When successive crops are desired,
apply at 150 lbs/acre following each cut of hay, providing
there is sufficient rainfall or irrigation.
Pasture:
Apply when growth starts in the spring at 200-350 lbs/
acre. Do not apply mid-summer without rainfall or
irrigation.
It is strongly recommended that the producer conduct
soil tests. Fertilizer applications should be adjusted
accordingly to avoid excessive build-up or deficiencies of
one or more nutrients.
CAUTION:
Do not use on container stock or in greenhouse
production. This is not a label; these guidelines are based
on the experiences of producers in the Fraser Valley.
Always refer to soil test results before use.
FEATURES
• High sulphur blend
